Quick Contact
Our Affiliate Partners
TransCreek Offers a wide range of cold rolled coils in Austnetic grades of Stainless Steel confirming to ASTM and various other specification in a variety of Sizes and finishes,
TransCreek Offers Stainless Steel Coils in the following Grades
304, 304L, 310S, 316, 316L
TransCreeks Stainless Steel Coil Product Specification:
| Dimension | Range (mm) | Standard Sizes (mm) |
| Thickness | 0.3 -6.0 | 0.30, 0.40, 0.50, 0.55, 0.63, 0.70, 0.80, 0.90, 1.00, 1.25, 1.50, 1.60, 2.00, 2.50, 2.80, 3.00, 3.15, 3.60, 4.00, 5.00, 6.00 |
| Width (mm) | 50 to 1250 | 1000, 1250 |
| ID(inner Diameter) | _____ | 406, 508 or 610 |
Chemical Composition of TransCreeks Standard Grades:
| Grade | C (max) | Si (max) | Mn (max) | Cr | Ni |
| 304 | 0.08 | 0.75 | 2.00 | 17.50 - 19. 5 | 8 - 10.5 |
| 304L | 0.03 | 0.75 | 2.00 | 17.50 - 19. 50 | 8.00- 12.00 |
| 310 S | 0.08 | 1.50 | 2.00 | 24.00- 26.00 | 19.00 - 22.00 |
| 316 | 0.08 | 0.75 | 2.00 | 16.00 - 18.00 | 10.00 - 14.00 |
| 316L | 0/03 | 0.75 | 2.00 | 16.00 - 18.00 | 10.00 - 14.00 |
| Grade | P (max) | S (max) | N (max) | Other Elements |
| 304 | 0.045 | 0.030 | 0.10 | ____ |
| 304L | 0.045 | 0.030 | 0.10 | _____ |
| 310 S | 0.045 | 0.030 | _____ | _____ |
| 316 | 0.045 | 0.030 | 0.10 | Mo 2.0 - 3.0 |
| 316L | 0.045 | 0.030 | 0.10 | Mo 2.0 - 3.0 |
Mechanical Properties Of TransCreeks Standard Grade in Annealed Condition:
| Grade | UTS N / mm2 min | 0.2 % Proof Stress /YS N / mm2 min | % EI (GL = 50 mm) min | Hardness HR5 max | Cold Bend |
| 304 | 515 | 205 | 40 | 92 | Not Required |
| 304L | 485 | 170 | 40 | 92 | Not Required |
| 310 S | 515 | 205 | 40 | 95 | Not Required |
| 316 | 515 | 205 | 40 | 95 | Not Required |
| 316L | 485 | 170 | 40 | 95 | Not Required |
Physical Properties(annealed conditions) CRSS:
| Details | |||
| 304/304L | 316/316L | 310S | |
| Density (gm/cm2) | 7.9 | 8.0 | 7.9 |
| Modules of Elasticity (Kg/mm2) | 19700 | 19700 | 20300 |
| Specific Heat Capacity (Cal /gm/ Degree C | 0.12 | 0.12 | 0.12 |
| Thermal conductivity (Cal /cm2/Sec/Deg C/cm at 100 degree C | 0.039 | 0.037 | 0.033 |
| Specific Electrical Resistance(u.cm2) | 72 | 74 | 80 |
| Co-Efficient of Thermal Expansion (Cx 10-6, 0-500 deg C) | 18.4 | 16.0 | 16.9 |
| Melting Range (Deg C) | 1400 - 1455 | 1370 - 1400 | 1400 - 1455 |
